An office fit out is a significant investment for any business. What many business owners don’t realise is that a large part of that cost may qualify for tax relief through capital allowances.
Done properly, capital allowances can reduce the real cost of your fit out considerably. Done badly, or not at all, they’re one of the most common ways businesses leave money on the table.
We’re a fit out contractor, not tax advisers, so this guide won’t replace a conversation with your accountant. What it will do is explain which parts of an office fit out typically qualify, how the main allowances work, and what you can do during the project to make your accountant’s job easier.
The rates in this guide are correct at the time of writing (November 2026). Tax rules change regularly, so always check the current position with your accountant before making decisions.
What Are Capital Allowances?
When your business buys something it will keep and use over time, you usually can’t deduct the full cost from your profits in the same way as everyday running costs. Capital allowances are how the tax system gives you relief on that spending instead.
For an office fit out, the key question is whether each part of the work counts as “plant and machinery”. Items that do can attract generous allowances, often with relief in the first year. Items that form part of the building itself usually can’t, although some relief may still be available more slowly.
That’s why the split of your fit out costs matters so much.
The Main Allowances for an Office Fit Out
Annual Investment Allowance (AIA)
The annual investment allowance gives 100% relief on qualifying plant and machinery, up to £1 million a year. It’s available to companies, sole traders and partnerships.
For most SMEs, the AIA does the heavy lifting. If your fit out and any other qualifying spending in the year come in under £1 million, the AIA can usually cover all the qualifying plant in the year you spend the money. This includes integral features such as electrical and heating systems, which would otherwise get slower relief.
Full Expensing
Full expensing gives companies 100% first-year relief on new and unused main rate plant and machinery, with no upper limit. It’s mainly useful for larger projects, or where your business has already used its AIA on other spending in the year.
There are a few points to be aware of. Full expensing is only available to companies paying corporation tax. It doesn’t cover integral features, which have their own 50% first-year allowance for companies. It also doesn’t apply to second-hand assets.
First-Year Allowances for Businesses Without Full Expensing
Since January 2026, a 40% first-year allowance has been available on new main rate plant and machinery. This includes unincorporated businesses that can’t use full expensing. The government announced in the Autumn Budget 2026 that this will rise to 50% in 2027.
Writing Down Allowances
Anything that doesn’t get first-year relief goes into a pool and is relieved gradually each year through writing down allowances. The main pool rate is 14%, and is due to fall to 12% from April 2027. Integral features in the special rate pool get 6% a year. This is why making full use of the AIA and first-year allowances is usually worth the effort.
Structures and Buildings Allowance (SBA)
Building works that don’t count as plant, such as new walls and some structural alterations, may still qualify for the Structures and Buildings Allowance. This gives relief at a flat rate spread over many years. It’s much slower, but it’s still worth claiming, including for tenants who pay for works in a leased office.
What Parts of an Office Fit Out Typically Qualify?
Every claim depends on the facts of the project, so treat the following as a general guide rather than a guarantee.
Items That Usually Qualify as Plant
Office furniture is one of the clearest examples. Desks, chairs, storage, meeting room furniture and breakout seating are all typically main rate plant. Kitchen and tea point equipment, sanitaryware, and fire alarm and security systems usually qualify too. Data cabling and AV installations normally qualify as well.
Demountable office partitions designed to be moved or reconfigured can often qualify as plant. This includes many glass office partitions systems. The detail matters, so it’s worth discussing your partition specification with your accountant.
Integral Features
Some building services are classed as “integral features”. These qualify for capital allowances, but at the special rate if they aren’t covered by the AIA. They include:
- Electrical systems, including lighting
- Cold water systems
- Heating and hot water systems
- Air conditioning and ventilation
- Lifts
On a typical fit out, the electrical, lighting and air conditioning works can make up a sizeable share of the budget. Because the AIA can be used against special rate spending first, many businesses choose to put their AIA towards integral features, where the slower 6% rate would otherwise apply.
Items That Usually Don’t Qualify as Plant
Some fit out costs are treated as part of the building itself. These include fixed walls and drylining, most suspended ceilings, floors and general building work. These items generally won’t attract plant and machinery allowances, although some may qualify for the SBA.
Professional fees and preliminary costs, such as design, project management and site set-up, are often apportioned across the qualifying and non-qualifying elements of the project. A detailed cost breakdown makes this far easier to do accurately.
Repairs vs Improvements
If you’re refurbishing an existing office rather than fitting out a new one, some costs may be deductible as repairs rather than capital spending. Replacing worn items like for like, or redecorating, can sometimes fall into this category. Where works go beyond a repair and improve the space, they’ll normally be treated as capital. This is worth raising early if you’re planning an office refurbishment.
A Simple Example
Imagine a company spends £150,000 on a fit out. The split might look something like this:
- £60,000 on furniture, kitchen equipment, demountable partitions, data cabling and fire alarm systems
- £50,000 on electrical, lighting and air conditioning works
- £40,000 on fixed walls, ceilings, decoration and general building work
If the company hasn’t used its AIA on anything else in the year, it could potentially claim 100% relief on the first £110,000 in the year of spending. The remaining £40,000 of building work wouldn’t qualify for plant allowances, but part of it may qualify for the SBA over time.
For a company paying corporation tax at the main rate of 25%, relief on £110,000 could be worth up to £27,500 in reduced tax. This is an illustration only. Your actual position will depend on your business, your profits and how your accountant analyses the costs.
How to Record Fit Out Costs So You Can Claim
This is where your fit out contractor can make a real difference. A single lump-sum invoice for “office fit out” makes it very hard for your accountant to identify what qualifies. An itemised breakdown makes it far easier.
Ask your contractor for a cost breakdown by element. That means separate figures for furniture, partitions, ceilings, mechanical and electrical works, data, kitchens and general building work. Keep all invoices and payment records, and note when each payment was made. Timing matters if your project runs across your financial year end.
It also helps to involve your accountant, or a capital allowances specialist, before the project starts. They can advise on how the costs should be recorded and whether timing your spending around your year end would make a difference.
At ACI, we’re happy to provide a detailed cost breakdown for your accountant as part of our process.
Leased Offices
Most SMEs lease their offices, and that doesn’t stop you claiming. Generally, if your business pays for the fit out, it’s your business that can claim the allowances on the qualifying items. Leases can include specific terms about fixtures and contributions from the landlord, so share your lease with your accountant when discussing the claim.
Common Mistakes to Avoid
The most common mistake is not claiming at all, or only claiming the obvious items like furniture. Integral features and qualifying parts of the building services are often missed.
Another is treating the whole fit out as one figure. Without a breakdown, qualifying spending can end up in the wrong category or not claimed at all.
Finally, don’t leave it until the project is finished. Planning the claim before the work starts usually leads to a better result and a lot less admin.
Planning an Office Fit Out?
Whether you’re planning a full CAT B fit out or a refresh of your existing space, we can help you create a workspace that works for your business and give your accountant the information they need.
Get a free quote or contact us to talk through your project.
This article is for general information only and isn’t tax advice. Speak to a qualified accountant or tax adviser about your own circumstances.